It’s easily somethng wrong with your keyboard on most laptops. Finding a keyboard for your model laptop elsewhere is much cheaper than going through the manufacture.Different manufacturers have different way of placing the keyboard on the System Board. Some manufacturers might change the way the keyboard sits on the system board for different models. If you are in this situation,Replace the laptop keyboard with these steps.

Removing the Damaged Keyboard

Step 1
Make sure the laptop is fully powered off, unplugged from the wall, and the battery taken out.

Step 2
Turn off the laptop. On some models icons indicating which screws are attached to the keyboard are displayed. If not, you may have to “eyeball” it if you can’t find a breakdown for your model online.

Step 3
Remove those screws with a T-8 or Phillips screwdriver.

Step 4
Turn the laptop back over and open it up. Check and see if the keyboard is tucked under any plastic pieces. If so, find if those plastic pieces are screwed into anything, and unfasten them as well. If not, it probably uses clamps that can easily be removed.

Step 5
Remove the plastic pieces carefully with a toothpick or plastic pick if there is any in the way.

Step 6
Unscrew any screws at the top (if necessary) and remove the keyboard itself from top to bottom. You’ll notice that the keyboard is connected with a thin, but wide, data cable to the system board at the bottom.

Step 7
Take that same pick and lift the plastic connectors that hold in this data cable in place.

Step 8
Carefully remove the data cable. Now the whole sony fe series laptop keyboard should be free.
Replacing the keyboard.
Step 1
Take the new keyboard out of the plastic, and slip the data cable back in between the plastic connectors on the system board. Make sure it’s all the way in.

Step 2
Use the pick to push the plastic connectors back into place, and make sure it’s holding the data cable in.

Step 3
Slip the keyboard itself into place, from bottom to top. Make sure the screw holes or clamps line up at the top.

Step 4
Refasten the keyboard in place at the top.

Step 5
If you had to remove any plastic pieces, carefully snap them back in and replace any screws you had to remove.

Step 6
Turn the laptop over and replace all of the keyboard screws.

Step 7
Finally, put the battery back in and power on the laptop. If all has gone well, the keyboard should be functioning like brand new.

Tips & Warnings

There may be some electronics surrounding the upper keyboard screws (if it has any),please ensure you are wearing and ESD anti-static tape, or in anti-static environment before any part of the work within the electronic device. Carefully lift it out if you can, but you may have to do this after you remove the screws that hold in the keyboard itself. Don’t forget to replace them before you replace the keyboard.It takes the right amount of pressure de-attach plastic parts from a laptop. Make sure you aren’t warping the plastic when pulling up on anything, and make sure you have removed everything connected to it beforehandIt’s very difficult to work on laptops, and any damage done internally my void your warranty. Work on laptops with discretion, and if you have any reservations, consult a professional.Make sure you got the right keyboard before you go through the trouble of removing the old one. You should be able to tell by the shape on the outside of the keyboard lining up with the old keyboard.