How to Protect Lithium-Ion Batteries

This item was filled under [ Laptop Parts ]

Lithium-ion batteries, or Li-ion, are batteries that are typically used in laptops or notebook computers. These laptop batteries are rechargeable, and typically you just have to plug in the power cord on the battery charger, and plug the battery charger into the battery itself, whether it is on a device or not. Most laptop and notebook computers have batteries in the computer itself, and when you plug the laptop battery into the power cord and transformer, it begins to charge. Proper care and maintenance should be taken to protect a lithium-ion battery pack and allow the battery to live up to its full capacity.

HP Pavilion DV5000 Battery 4400mAh

HP Pavilion DV5000 Battery 4400mAh

Step 1

Alternate lithium-ion batteries if your device came with multiple batteries. Some devices, such as laptops, come with a spare battery pack. Use them alternately to prolong the life of each laptop battery.

Step 2

Protect your batteries from extreme temperatures by keeping them stored or used in areas where the temperature is regulated. The only reason to put the laptop battery in extremely cold temperatures is to shock it if it does not hold a charge. Even then, it needs to be protected with a thick layer of newspaper.

Step 3

Do not fully discharge the battery. This will cause a shorter life span of the toshiba laptop battery. Make sure to plug in used batteries once every 24 hours unless they’re in storage. Stored batteries should be charged at least once a year.

Step 4

Protect lithium-ion batteries from heat from the laptop, notebook and other devices by removing the battery and place the battery on a table or somewhere not lit by direct sun so it can cool to room temperature.

Step 5

Do not leave Lithium-ion batteries in hot cars or in hot, unventilated structures. Keep the sun off of these hp laptop batteries at all cost. Overheating Lithium-ion batteries can significantly shorten their life span.

You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.